asme generater vapor

Caldera a diesel / gas

Adopta un horno de gran diámetro que garantiza la combustión completa y el suficiente espacio de almacenamiento de vapor y superficie de calentamiento para producir alta potencia térmica y vapor de alta calidad. Al mismo tiempo, el efecto de ahorro de energía y protección del medio ambiente es notable, y la emisión de NOx se puede lograr fácilmente por debajo de 30 mg.

Capacidad: Vapor:1 - 110t/h
Agua Caliente:0.7 - 116MW
Presión de trabajo: 0.7 - 5.4MPa
Eficiencia térmica: Más de 98%
Tipos recomendados: serie WNS / serie SZS
Combustibles aplicables: gas natural, biogás, gas licuado de petróleo, gas de alto horno, etc.
  • [email protected] >
  • Cotización en gratis >
  • Diferencia de caldera

    Caldera de vapor a gas de la serie WNS

    WNS serie de la Diferencia de caldera /diesel es el tipo de caldera de combustiòn interna ,horizontal ,3 pasos de espalda húmeda . Cuando los combustible queman en el horno de olas ,las llamas formas lleno en el horno y toda combustión desprende calor por la pared del hornor , esto es el 1ª paso;

    Diferencia de caldera

    Caldera de agua caliente a gas de la serie SZS

    SZS serie de la caldera está diseñada con doble tambores longitudinales y estructura de cámara tipo "D".El horno se coloca a la derecha y el banco de tubos de convección está a la izquierda, el supercalentador está dispuesto en el banco de tubos de convección;

    Caldera a biomasa

    Las calderas de ZOZEN tiene una amplia aplicabilidad de combustibles y diseña racionalmente las estructuras relevantes de acuerdo con diferentes características del combustible para garantizar un funcionamiento eficiente y ahorro energético de la caldera. Puede resolver los problemas tales como incineración, coque, abrasión, combustión de arco y tolva, etc. y logra las emisiones de NOx por debajo de 200mg.

    Capacidad: Vapor:2 - 75t/h
    Agua Caliente:2.8 - 116MW
    Presión de trabajo: 0.7 - 5.4MPa
    Eficiencia térmica: Más de 88%
    Tipos recomendados: serie SZL / serie DHL
    Combustibles aplicables: pellets de biomasa, cáscara de palma, cáscara de coco, aserrín, paja, mazorca de maíz, paja de arroz, etc.
  • [email protected] >
  • Cotización en gratis >
  • Diferencia de caldera

    Caldera de vapor a biomasa de la serie SZL

    SZL serie de la caldera de vapor de biomasa es un tipo horizontal de caldera de acuotubulares de parrilla viajera con doble tambor se utiliza estructura de paquete o ensamblada en el taller .La capacidad de vapor de la caldera del paquete es de 4-6 ton/hr y otra es de 6-35 ton/hr , que se compone de 2 partes.

    Diferencia de caldera

    Caldera de agua caliente a biomasa de la serie DHL

    DHL de la caldera de tubo de esquina es una caldera montada en el campo, utiliza un sistema de tuberías como el bastidor de toda la caldera y soporta la carga completa de la caldera, lo que hace que la caldera no sea de marco. Al mismo tiempo, este marco también sirve como la esquina inferior de la caldera y los encabezados superior e inferior.

    Caldera de lecho fluidizado circulante (CFB) bajo en nitrógeno

    La serie SHX/DHX aplica la técnica de combustión a baja temperatura, ajuste la proporción de suministro de aire primero y secundario, optimiza el diseño del aire secundario. Diseña razonablemente la superficie de calentamiento del horno y controla la temperatura del lecho a 860 ~ 880 ° C que logra efectivamente la emisión de NOx por debajo de 100mg.

    Capacidad: Vapor:10 - 280t/h
    Agua Caliente:7 - 116MW
    Presión de trabajo: 1.25- 5.3MPa
    Eficiencia térmica: Más de 89%
    Tipos recomendados: serie DHX / serie SHX
    Combustibles aplicables: varios tipos de carbón, ganga de carbón, esquisto bituminoso, basura urbana, limo, etc.
  • [email protected] >
  • Cotización en gratis >
  • Diferencia de caldera

    Caldera de lecho fluidizado circulante (CFB) de vapor de la serie DHX

    La tecnología de combustión de lecho fluidizado circulante (CFBC)como nueva tecnología de carbón limpio de alta eficiencia y baja contaminación tiene muchas ventajas que otros métodos de combustión . La combustión en lecho fluidizado circulante es una combustión a baja temperatura.

    Diferencia de caldera

    Caldera de lecho fluidizado circulante (CFB) de agua caliente de la serie SHX

    La tecnología de combustión de lecho fluidizado circulante (CFBC)como nueva tecnología de carbón limpio de alta eficiencia y baja contaminación tiene muchas ventajas que otros métodos de combustión . La combustión en lecho fluidizado circulante es una combustión a baja temperatura.

    Location of ASME Containers AmeriGas egardless of its size, any ASME tank filled on-site must be located so that the filling connection .. Approximate Vapor Pressures of Propane (PSIG): 0°F . . ASME International Boiler and Pressure Vessel Code The ASME American Society of Mechanical Engineers International Boiler and Miniature Boilers; Electric Boilers; Organic Fluid Vaporizer Generators. steam or other vapor is generated at a pressures exceeding 15 psig,; and high Electric Steam Boilers | Vapor Power Manufactures Boilers, Packaged Steam Generators, Thermal Fluid Heaters, All boilers utilize ASME pressure vessels and all electrical components are UL AmeriVap Systems: Industrial & Commercial Dry Steam Cleaners AmeriVap represents dry steam vapor technology at its best. line of industrial steam cleaners are legally compliant ASME certified steam generators that are dynamic modeling of an absorption refrigeration November 11-15 for alternatives to vapor-compression refrigeration has become more critical. four basic components, an evaporator, an absorber, a ge

    Location of ASME Containers AmeriGas egardless of its size, any ASME tank filled on-site must be located so that the filling connection .. Approximate Vapor Pressures of Propane (PSIG): 0°F . . ASME International Boiler and Pressure Vessel Code The ASME American Society of Mechanical Engineers International Boiler and Miniature Boilers; Electric Boilers; Organic Fluid Vaporizer Generators. steam or other vapor is generated at a pressures exceeding 15 psig,; and high Electric Steam Boilers | Vapor Power Manufactures Boilers, Packaged Steam Generators, Thermal Fluid Heaters, All boilers utilize ASME pressure vessels and all electrical components are UL AmeriVap Systems: Industrial & Commercial Dry Steam Cleaners AmeriVap represents dry steam vapor technology at its best. line of industrial steam cleaners are legally compliant ASME certified steam generators that are dynamic modeling of an absorption refrigeration November 11-15 for alternatives to vapor-compression refrigeration has become more critical. four basic components, an evaporator, an absorber, a generator.

    [email protected] > Cotización en gratis >

    PACKAGED STEAM GENERATORS California Boiler The MODULATIC steam generator is a once through, Every unit is built to ASME Standards, Harttord inspected VAPOR POWER INTERNATIONA

    PACKAGED STEAM GENERATORS California Boiler The MODULATIC steam generator is a once through, Every unit is built to ASME Standards, Harttord inspected VAPOR POWER INTERNATIONAL. 551 S

    [email protected] > Cotización en gratis >

    View PDF Subcritical, Once-Through Vapor. Generators in Counter flow. The swirl flow of Freon 12 in a tubular heat exchanger, indirectly heated by forced con- vection of Determination of Void Fraction, Incipient Point of The incipient point of boiling and initial point of net vapor generation were determined with high-speed Sign in or create your free personal ASME account. The Influence of Twisted Tapes in Subcritical, Once-Through The Influence of Twisted Tapes in Subcritical, Once-Through Vapor Generators in Counter flow. M. Cumo Sign in or create your free personal ASME account. Session 6: Turbine design I ASME ORC 2015 “Influence of Molecular Complexity on Nozzle Design for an Organic Vapor Wind Similarity concept allows the testing of a turbo-machine in a simple

    View PDF Subcritical, Once-Through Vapor. Generators in Counter flow. The swirl flow of Freon 12 in a tubular heat exchanger, indirectly heated by forced con- vection of Determination of Void Fraction, Incipient Point of The incipient point of boiling and initial point of net vapor generation were determined with high-speed Sign in or create your free personal ASME account. The Influence of Twisted Tapes in Subcritical, Once-Through The Influence of Twisted Tapes in Subcritical, Once-Through Vapor Generators in Counter flow. M. Cumo Sign in or create your free personal ASME account. Session 6: Turbine design I ASME ORC 2015 “Influence of Molecular Complexity on Nozzle Design for an Organic Vapor Wind Similarity concept allows the testing of a turbo-machine in a simple air test

    [email protected] > Cotización en gratis >

    PACKAGED STEAM GENERATORS California Boiler The MODULATIC steam generator is a once through, Every unit is built to ASME Standards, Harttord inspected VAPOR POWER INTERNATIONAL. 551 S View PDF Subcritical, Once-Through Vapor. Generators in Counter flow. The swirl flow of Freon 12 in a tubular heat exchanger, indirectly heated by forced con- vection of Determination of Void Fraction, Incipient Point of The incipient point of boiling and initial point of net vapor generation were determined with high-speed Sign in or create your free personal ASME account. The Influence of Twisted Tapes in Subcritical, Once-Through The Influence of Twisted Tapes in Subcritical, Once-Through Vapor Generators in Counter flow. M. Cumo Sign in or create your free personal ASME account. Session 6: Turbine design I ASME ORC 2015 “Influence of Molecular Complexity on Nozzle Design for an Organic Vapor Wind Similarity concept allows the testing of a turbo-machine in a simple

    PACKAGED STEAM GENERATORS California Boiler The MODULATIC steam generator is a once through, Every unit is built to ASME Standards, Harttord inspected VAPOR POWER INTERNATIONAL. 551 S View PDF Subcritical, Once-Through Vapor. Generators in Counter flow. The swirl flow of Freon 12 in a tubular heat exchanger, indirectly heated by forced con- vection of Determination of Void Fraction, Incipient Point of The incipient point of boiling and initial point of net vapor generation were determined with high-speed Sign in or create your free personal ASME account. The Influence of Twisted Tapes in Subcritical, Once-Through The Influence of Twisted Tapes in Subcritical, Once-Through Vapor Generators in Counter flow. M. Cumo Sign in or create your free personal ASME account. Session 6: Turbine design I ASME ORC 2015 “Influence of Molecular Complexity on Nozzle Design for an Organic Vapor Wind Similarity concept allows the testing of a turbo-machine in a simple air test

    [email protected] > Cotización en gratis >

    Location of ASME Containers AmeriGas egardless of its size, any ASME tank filled on-site must be located so that the filling connection .. Approximate Vapor Pressures of Propane (PSIG): 0°F . . ASME International Boiler and Pressure Vessel Code The ASME American Society of Mechanical Engineers International Boiler and Miniature Boilers; Electric Boilers; Organic Fluid Vaporizer Generators. steam or other vapor is generated at a pressures exceeding 15 psig,; and high Electric Steam Boilers | Vapor Power Manufactures Boilers, Packaged Steam Generators, Thermal Fluid Heaters, All boilers utilize ASME pressure vessels and all electrical components are UL AmeriVap Systems: Industrial & Commercial Dry Steam Cleaners AmeriVap represents dry steam vapor technology at its best. line of industrial steam cleaners are legally compliant ASME certified steam generators that are dynamic modeling of an absorption refrigeration November 11-15 for alternatives to vapor-compression refrigeration has become more critical. four basic components, an evaporator, an absorber, a ge

    Location of ASME Containers AmeriGas egardless of its size, any ASME tank filled on-site must be located so that the filling connection .. Approximate Vapor Pressures of Propane (PSIG): 0°F . . ASME International Boiler and Pressure Vessel Code The ASME American Society of Mechanical Engineers International Boiler and Miniature Boilers; Electric Boilers; Organic Fluid Vaporizer Generators. steam or other vapor is generated at a pressures exceeding 15 psig,; and high Electric Steam Boilers | Vapor Power Manufactures Boilers, Packaged Steam Generators, Thermal Fluid Heaters, All boilers utilize ASME pressure vessels and all electrical components are UL AmeriVap Systems: Industrial & Commercial Dry Steam Cleaners AmeriVap represents dry steam vapor technology at its best. line of industrial steam cleaners are legally compliant ASME certified steam generators that are dynamic modeling of an absorption refrigeration November 11-15 for alternatives to vapor-compression refrigeration has become more critical. four basic components, an evaporator, an absorber, a generator.

    [email protected] > Cotización en gratis >
    Diferencia de caldera

    ©ZOZEN boiler Co.,Ltd..Todos los derechos reservados